Email:alina@tkfm.cn Shenyang Taike Fluid Control Co.,Ltd

Shenyang Taike Fluid Control Co.,Ltd

The Characteristics Of Stainless Steel Electric Gate Valve

Stainless steel electric gate valve action force than the electric valve, electric valve switch action speed can be adjusted, simple structure, easy maintenance, action process due to the gas itself, the buffer characteristics, not easily damaged due to stuck, but must have gas, and its The control system is also more complex than the electric valve. Stainless steel electric gate valve responsive, safe and reliable, many of the control requirements of the plant designed for pneumatic instrument control components set up compressed air station. Electric is to electricity. And can control the flow of the device.Stainless Steel Gate Valve

Electric valve simply refers to the use of electric actuators to control the valve, in order to achieve the valve on and off. Which can be divided into upper and lower parts, the upper part of the electric actuator, the lower part of the valve. Electric valve is divided into two kinds, one for the angle of the trip electric valve: the angle of the electric actuator with the angle of the trip valve to use, to achieve the valve within 90 degrees of rotation control pipe fluid on and off; the other is straight trip electric valve: Straight travel electric actuator with straight stroke valve to use, to achieve the upper and lower valve plate action control pipe fluid off. Usually in the highly automated equipment supporting the use of.Stainless Steel Gate Valve

The solution treatment should prevent the surface from being carburized during heating, since the carburization increases the sensitivity of the steel to intergranular corrosion. In the valve, the valve body, the valve seat is a kind of so-called inner piece which directly contacts the working medium, Performance requirements and resistance to intergranular corrosion are much higher than those of other stainless steel valves. Therefore, the solid solution treatment of the inner parts requires, in particular, the surface carburization, which is usually carried out in a neutral or slightly oxidizing atmosphere get on. For heat treatment is no longer processed or processing allowance is very small parts, heating should pay attention to the cleanliness of the furnace, and remove the surface of the oil to prevent the decomposition of these dirt in the heating, so that parts of the surface carburizing.Stainless Steel Gate Valve


Copyright © Shenyang Taike Fluid Control Co.,Ltd All Rights Reserved.
QR Code