Email:alina@tkfm.cn Shenyang Taike Fluid Control Co.,Ltd

Shenyang Taike Fluid Control Co.,Ltd

Parts Of Cast Steel Ball Valve

      In the face of disc fragmentation and media flow back, strengthen day-to-day maintenance and cleaning. The most common failure of check valves is disc breaking and backflow of the media. The reason that the disc is broken is the main check valve before and after the media pressure is close to the balance and each other "saw" state, after the disc and the valve seat between the long beat of some brittle materials made of the disc broken. Buy products in advance should be as far as possible to choose a strong resilient check valve. The main reason for the phenomenon of media backflow is that the sealing surface is damaged and mixed with media, so the use of the time must pay attention to day-to-day maintenance, protection of the seal surface and remove impurities.Cast Steel Ball Valve
      Facing the valve plate, check the relevant parts and prevention beforehand, even the quality and durable check valve, if improper installation or maintenance awareness is low, it is easy to encounter the condition of the valve plate. The first thing to do is check the disc shaft and the drain hole on the guide sleeve for blockage, or check the installation of the valve plate. Then check whether the gap between the disc shaft and the guide sleeve is too small cause the disc shaft wear seriously. After troubleshooting, clean the equipment in time to keep clean, and regularly check and replace.Cast Steel Ball Valve
      In the face of damage to the rocker mechanism, check the replacement parts. There is also a problem often occurs is the check valve rocker mechanism damage, on the one hand is the work of the stop valve before the pressure close or fluctuations, on the one hand because the production parts unqualified to make the rocker mechanism assembly is not. In order to effectively avoid this situation need to maintain the operating pressure of the smooth, and the use of regular maintenance. Cast Steel Ball Valve
      These are some of the most common problems in the use of check valves, although they are not very serious, but ignoring these seemingly small problems and not taking corresponding measures will cause more serious consequences. Not only shorten the service life of the product, but also affect the function of the product, as well as the effect of the use.Cast Steel Ball Valve

Copyright © Shenyang Taike Fluid Control Co.,Ltd All Rights Reserved.
QR Code