Email:alina@tkfm.cn Shenyang Taike Fluid Control Co.,Ltd

Shenyang Taike Fluid Control Co.,Ltd

Characteristics Of Valve

(1) Globe easier than gate valve, manufacturing and maintenance more convenient.

(2) the seal easy to wear and abrasion, well sealed, open and close the disc and no relative slip between the sealing surfaces of the valve body, wear and scratches are not serious, good sealing performance and long service life.

(3) when opening and closing, valve flap small, thus the valve height smaller than the valve, but the structure of length longer than the gate.

(4) large torque, opening and closing effortless, opening and closing time of the headmaster.

(5) fluid resistance, media channel more twists and turns due to the valve body, fluid resistance, low power consumption.

(6) nominal pressure PN ≤ 16MPa medium flow direction, generally use the downstream, direction under the disc medium high; nominal pressure PN ≥ 20MPa, currents, and media from disc dirty. To increase the seal. When using valves medium can only flow in one direction, can't change the direction of flow.

(7) when fully opened, the disc is often affected by erosion.

Valve stem axis perpendicular to the valve seat sealing surface. Open or close the valve stem travel relatively short, and has a very reliable cutting action makes this valve is suitable for medium-cut off or adjust the throttle and use.


Copyright © Shenyang Taike Fluid Control Co.,Ltd All Rights Reserved.
QR Code