Email:alina@tkfm.cn Shenyang Taike Fluid Control Co.,Ltd

Shenyang Taike Fluid Control Co.,Ltd

Characteristics And Structure Of Fully Welded Ball Valve

     As the seat is made of carbonated Teflon seal ring and disc spring, so the pressure and temperature changes adaptability, in the pressure and temperature range will not produce any leakage.Fully Welded Ball Valve

    City gas: gas output pipeline, the main line and the supply lines and other feeder lines. Central heating: large heating equipment output pipeline, trunk line, feeder line. Hot switch: pipe and the circuit opening and closing.

Iron and steel plants: all kinds of fluid pipelines, exhaust gas pipelines, gas and heat supply pipelines, fuel supply pipes. Various industrial equipment: all kinds of heat treatment pipes, all kinds of industrial gas and heat pipes. characteristic:

All-welded ball valve, there will be no external leakage and so on. The processing of the ball has advanced computer detector tracking test, so the ball of high precision machining. As the valve material with the pipe material, there will be no stress uneven, nor will the earthquake and the vehicle through the ground when the deformation, the pipeline aging. Seal ring body with 25% Carbon (carbon) RPTFE material, to ensure complete leakage (0%). Buried welding ball valve can be buried directly underground, do not build large valve wells, simply set up on the ground small shallow wells, greatly saving construction costs and engineering time.Fully Welded Ball Valve

    According to the pipeline construction and design requirements, adjust the length of the valve body and stem height. The precision of the ball is very precise, the operation is light, no bad interference. Using advanced raw materials, to protect the pressure above PN25. Compared with similar products in the same industry, the valve body is small, and the appearance is beautiful. To ensure the normal operation of the valve, the use of the case, the service life of more than 15 years.

    Features: 1. The valve body is welded by the steel pipe. 2. The ball pad is reinforced with polytetrafluoroethylene. 3. Stem with explosion-proof design. 4. Temperature range: -60-200 ℃ 5. Drive mode: manual or turbine drive.

6. Test standard: Api 598 Fully Welded Ball Valve


Copyright © Shenyang Taike Fluid Control Co.,Ltd All Rights Reserved.
QR Code