Email:alina@tkfm.cn Shenyang Taike Fluid Control Co.,Ltd

Shenyang Taike Fluid Control Co.,Ltd

Power-brake Integrated Gate

Power-brake Integrated Gate

Brake integral gate operation requirements: 1, the gate of the gate in the operation of the operation, the unit must be issued by the person in charge of scheduling instructions can not open or close, the consequences at your own risk. 2, non-working units are not allowed to operate the steel...

Product Details

Brake integral gate operation requirements:

1, the gate of the gate in the operation of the operation, the unit must be issued by the person in charge of scheduling instructions can not open or close, the consequences at your own risk.

2, non-working units are not allowed to operate the steel gate hoist and related equipment.

3, the operator must undergo a professional training, thinking concentrated, love and dedication, have a sense of responsibility, and in the course of operation in strict accordance with the use of the process, strict operation of the machine supervision to prevent accidents.

4, before starting to check whether the normal hydraulic equipment, all parts of the damaged. And record the day of the facility in the record.

5, after the shutdown to check whether the situation of various accessories leaks, and the day of scheduling personnel, operators, shutdown time work records.

6, if the middle of a power outage, the switch should be placed in the neutral, and pull off the power to remove the drive belt.


The gate gates are composed of two parts: the gate and the gate. The gate of the gate is the supporting member of the gate, and the running slideway of the ram is installed by the anchor bolts in the second concrete of the sluice pier and the gate plate, and the whole water The pressure is safely transferred to the chamber. For the scientific and reasonable conservation of materials and reduce their weight, the gate of the gate of the cross-section made of lattice, cross-sectional size according to the load size and gate operation of the comprehensive consideration. The brake plate is used to close and open the orifice of the movable retaining member, the board is surrounded by cast iron frame beam, in order to improve the strength of the gate, the board made of arch, arch of the central angle of 60 degrees designed to reduce Its water pressure. For the cast iron gate to facilitate the manufacture, transportation and installation, the gate can be made up and down parts, until after the installation site and then bolted to assemble the whole, the connection between the upper and lower plate flange and ribs to make the middle of the gate beam , In order to improve the longitudinal stiffness of the gate, in the width direction of the longitudinal ribs to improve its lateral stiffness, and play the role of stringer.


Hot Tags: power-brake integrated gate, manufacturers, suppliers, buy, discount
Copyright © Shenyang Taike Fluid Control Co.,Ltd All Rights Reserved.
QR Code