Email:alina@tkfm.cn Shenyang Taike Fluid Control Co.,Ltd

Shenyang Taike Fluid Control Co.,Ltd

Actuator Fully Welded Ball Valve

Product Description: This series of products are reliable sealing performance, maintenance-free for 20 years, switch torque light,can be installed in heat transfer stations, district heating pipe network, branch pipes, heat exchanger unit, heat transfer equipment or ancillary equipment connected...

Product Details

03.jpg

Product Description:

This series of products are reliable sealing performance, maintenance-free for 20 years, switch torque light,can be installed in heat transfer stations, district heating pipe network, branch pipes, heat exchanger unit, heat transfer equipment or ancillary equipment connected to other.use for cut off . The main use of the urban heat, city gas, city water supply and drainage lines. 

Standard type:

zz66.png

Full bore type:


zz92.png

fully-welded-ball-valve-part-list.jpg

No.

Part name

Material

1

Body

Carbon steel St37.8

2

Neck

PTFE+SPCB

3

Ball

304 stainless steel 

4

Stem

2Cr13

5

Seat

25%C+PTFE

6

Metal washer

60Si2Mn

7

Spring

60Si2Mn

8

"O" Ring

FPM

9

End piece

Carbon steel St37.8

10

Handle

Carbon steel +HCr

11

"O" Ring

FPM

12

Gland

304 stainless steel 

IMG_5322.jpg

Five Advantages:

1. integral seamless steel tube pressed full-auto welded without leaking outward.

2. PTFE+25% carbon fiber and disc spring feely compensating structure zero leakage.

3. can be directly buried without need of a high ground well,saving the engineering cost.

4. both valve and pipeling are made of the same material, without the condition of uneven sterss.

5. in multiple connection combination, for use with special working conditions.

Full bore type:


zz87.jpg

zz88.png

zz89.jpg

zz90.png

We pay much attention in Test process:

(1) Shell Hydrostatic Test

ANSI B 16.34 Section   7.1

Valve Size NPS

Test pressure

Test Time. Sce

Below DN50

1:5 times the 100°F

15 Sce

DN65~DN200

Rating of  ANSI  Class

60 Sce

Up DN250

Max. Operating Pressure

180 Sce


Test pressure should   be above 1.5 times  than the valve's Max work pressure (100F)


(2) Seal Hydrostatic Test

The pressure should be more 1.1 times than working pressure by seal hydrastatic test

zz78.jpg

ANSI B 16.34   Section 7.2

Valve Size NPS

Test pressure

Test Time. Sce

below DN50

1:1 times the 100°F

15 Sce

DN65~DN200

Rating of  ANSI Class

30 Sce

above DN250

Max. Operating Pressure

60 Sce


Test pressure should be more 1.5 times  than the valve's Max work pressure (100F)

180Sce


(3) Seal Air Test

Seal air leakage test is based on 80PSIG(6kgf/cm2) inert-gas or the air reach the test pressure, then close the valve. after that check the valve whether it is leakage or not.

FAQ 

1.What is the MOQ?
According to company regulations 10 sets, 5 sets is also acceptable for intentional customer.

2.What about your payment terms?
30% payment in advance, 70% balance pay T/T before loading.

3.What is your delivery date?
10-30 days after received the advance payment.

4.Which models sell best in your factory?
Q61C-25; Q361FC-16; Q661FC-25; Q961C-25(DN15-DN1400)

5.What kind of certification you have?
CE; ISO9001; EAC; API; TS...


6.How many people in your factory? How many designer and how many QC people?
More than 200 employees, 8 engineers, 55 QC people, 20 years experience.

Related Products
Copyright © Shenyang Taike Fluid Control Co.,Ltd All Rights Reserved.
QR Code